“Wet-Look” Lacquer Formulas
Each of our “Wet-Look” Lacquer sealers are compatible/interchangeable but differentiate based on the formula adhering to your local VOC regulations. Each formula offers the same superior protection!
VOC 95 g/l
VOC 395 g/l
VOC 95 g/l
Wet Look Lacquer Green
“Wet Look” Green is a revolutionary super low VOC formula that has a super tough film that protects Interior floors, garage floors, driveways, patios and BBQ areas from oil and grease stains while giving a rich “wet look” appearance. Designed for porous surfaces, it is UV resistant, ready-to-use, clear, solvent-based, acrylic finish designed to protect and beautify porous unglazed tile, concrete, and masonry surfaces. Use also to seal fish ponds and statuary. The unique deep penetrating formula provides superior bonding to the surface reducing the risk of peeling. It is LEED eligible.
• 75% Lower VOC
• Meets All Air quality requirements
• High gloss solvent base
• Use indoors or outdoors
• Fast drying and long lasting
• Prevents staining/ High solids
• Strong resistance to efflorescence
• VOC 95 g/l
Wet Look 2000 Lacquer
Glaze N Seal “Wet Look Lacquer has a super tough film that protects Interior floors, garage floors, driveways, patios and barbeque areas from oil and grease stains while giving a rich “wet look” appearance. Designed for porous surfaces, it is UV resistant, ready-to-use, clear, solvent-based, acrylic finish designed to protect and beatify unglazed tile, concrete, and masonry surfaces Use also to seal fish ponds and statuary. The unique deep penetrating formula provides superior bonding to the surface reducing the risk of peeling. It is LEED eligible.
• High gloss solvent base
• Use indoors or outdoors
• Fast drying and long lasting
• Easy to apply with brush or sprayer
• Non-yellowing/ Re-coatable
• Prevents staining/ High solids
• Strong resistance to efflorescence
• VOC 395 g/l
Original “Wet Look” Lacquer
From the beginning, Glaze ‘N Seal has been the industry leader in the development of true “wet look” coatings to protect and beautify all decorative concrete surfaces, including stamped, stained, and exposed aggregates. These products are also suitable for use on masonry, porous tile, fountains, and fishponds.
- Superior deep penetrating formulas
- Excellent stain resistance
- Reduces efflorescence, freeze-thaw, and fading
- Non-yellowing and easy to recoat
- VOC 595 g/l
Wet Look Water Based Sealer
Wet Look WB is a durable water based sealer designed to give the surface that deepened “Wet Look” appearance.
It is a clear acrylic finish designed to protect and beautify slate, concrete, flagstone, quarry tile and other masonry surfaces. It can be used indoors and outdoors and is UV resistant. It is LEED eligible.
• Deepened wet look appearance
• Water base formula
• Medium sheen / film forming
• Use indoors and outdoors
• Resist oil, grease and food stains
• Non-yellowing
• Efflorescence resistant
• Low VOC formula
Slate Sealer
A clear acrylic water base finish designed to protect and beautify slate, flagstone and quarry tile. Protects against all organic stains including cooking oil, grease and beverages. UV resistant. It may be used indoors or outdoors and is extremely easy to apply and maintain. It is LEED eligible.
• Water base
• Low gloss / film forming
• Ideal for denser stone & brick
• Protects from stains, oil and grease
• Non-yellowing
• Efflorescence resistant
• Low VOC formula
Paver Sealer
An easy to use water base acrylic designed to seal and lock in joint sand in one step. Provides long lasting protection against stains, oil and grease. Beautifies and protects from color fading. This unique formula makes the surface easier to clean and maintain. Surface can be recoated with a maintenance coat as needed. It is LEED eligible.
• Seals Interlocking pavers & brick pavers and locks sand in place
• Water base
• Excellent stain resistance
• Reduces paver fading
• Resist mildew & weed growth
• Efflorescence resistant
• Easy to use
• Low VOC formula
Olé® Mexican Tile Sealer
Olé offers high gloss protection and beauty to unglazed Mexican paver tile and other porous terra cotta surfaces with fewer coats. It has a durable high gloss finish that can be used indoors or out doors and is UV resistant. It is LEED eligible.
• Ultimate High Gloss Protection
• For porous Saltillo and Terra Cotta Tile
• Build higher gloss with fewer coats
• Use indoors and outdoors
• Resist oil, grease and food stains
• Water base safe, easy cleanup
• Low VOC formula
Multi-Purpose Sealer
This sealer may be used on most concrete, masonry, brick and unglazed tile to protect and slightly enhance the surface appearance. It is a UV resistant, durable, non-yellowing sealer that provides excellent stain resistance against water, oil, grease and acids on interior and exterior surfaces. It is re-coatable. It is LEED eligible.
• Water based
• Film forming
• Medium gloss
• Easy to apply
• Excellent stain resistance
• Breathable
• Resists mold and algae
• Low VOC formula
Grout Sealer
A long lasting clear water based acrylic grout sealer designed to repel water and stains on cement base grouts and mortars. Protects against all organic stains including cooking oil, grease and beverages. It is LEED eligible.
• Medium gloss / film forming
• Water base
• Can seal day after grouting
• Safe in food preperation areas
• Use indoors or outdoors
• Use anywhere other grout sealers have failed
(after removal of failed sealer)